CRC BLUE MOULD PROTECT 

Short term blue colored corrosion inhibitor for mould tools.

Non silicone corrosion inhibitor for moulding tools. NSF registered for use in the food and beverage industry.

• NSF H2 registered

• Ideal for short-term inactivity of mould tools, dies and jigs

• Highly visible blue dye provides an easy visual method for ensuring complete coverage

• Displaces humidity on metal surfaces

• Silicone-free

• No need for cleaning as the product moulds off during the first cycles

CRC INOX 200 Anti-corrosion coating for stainless steel surface.

Coating with good anti-corrosion properties and a nice look, identical to stainless steel (black). The coating is fast drying, resistant to high temperatures and has excellent adhesion properties. Ideal touch-up paint, to be used after welding or when mounting a stainless steel construction. Will cover and protect discolored welding seams.

GALVA BRITE

Anti - Corrosion Products

Protective, final coating with a shiny aluminum aspect.

A single component Zinc-Aluminum coating. Protects against corrosion and forms a glossy aluminum look on the coated surface. Good adhesion to metal surfaces. Results in a unique combination of flexibility and hardness. For perfect results please use CRC Zinc Primer first.

• Excellent touch-up for galvanized surfaces.
• Long term corrosion protection.
• Totally free of lead and chromates.
• None chlorinated solvents.
• Unique combination of flexibility and hardness providing an excellent adherence to the metal surface.
• Cleaning mechanical parts.
• Handling equipment.
• Chains.
• Railroad equipment.
• Agricultural equipment.
• Long term outdoor corrosion protection.
• Corrosion protection of all ferrous materials.
• Touch-up of galvanized equipment after repair.
• Touch-up of parts after hot dip galvanizing. 

DIRECTIONS To Use

• ·Shake aerosol can very well for at least one minute after agitator ball is free. Stir or mix bulk product well to obtain a homogeneous dispersion. Repeat frequently while using.
• Apply to a clean, degreased, dry surface for best results. Remove rust and scale with a wire brush.
• Apply in light, even coats; best results are obtained with 2 lighter rather than 1 heavy coat. Additional coats can be applied after 15-20 minutes.
• When spraying is finished, clean aerosol valve by turning can upside down and press button until only propellant escapes. If clogging occurs, remove button and clean orifice with fine wire.
• Do not use on energized equipment. Use in well ventilated area